Structural
A36 / Q235 Grade H-Beam Structural Columns
Wide-flange hot-rolled sections optimized for heavy anchoring connections, column bases, and bridge girders.
Explore H-Beam Range
Primary Fastening & Structural Inventory
Engineering Profiles & Fastening Solutions: High-Demand Series
Direct supply from 1,500-acre smart manufacturing clusters in Tianjin and Tangshan. Precision structural long products, connectors, and anchoring elements engineered for unyielding structural performance.
Reinforcing
Deformed Rebar 6mm–12mm for Foundation Tie-Ins
High-yield ribbed reinforcement bars providing deep bonding strength for cast-in and post-installed anchoring systems.
Explore Long Sections
Galvanized
HDG Flat Steel 3–60mm for Connector Baseplates
Hot-dip galvanized flat bar with thick metallurgical zinc bonding, designed for slotted connector brackets and anchor shims.
Explore Flat Steel
Tubular
Galvanized Structural Pipe for Anchor Sleeves
High-strength zinc-protected circular steel tubes engineered for hollow wall anchor housings and scaffold couplings.
Explore Steel Pipe
Forming Coil
Q235B / Q355B Bright Cold Rolled Steel Coil
Fine-gauge uniform coil stock tailored for precision progressive stamping of expansion anchor sleeves and seismic clips.
Explore Steel Coil
Framing
Perforated Galvanized Angle for Facade Anchors
Equal/unequal slotted steel angles ideal for through-bolt fixation, curtain-wall subframes, and mechanical bracing.
Explore Angle Steel
Heavy Channel
C/U Channel Structural Framing Sections
Galvanized structural channel engineered for heavy-duty embedment brackets, cast-in channels, and expansion bolt tracks.
Explore Channel Steel
Solid Bar
Galvanized Plain Round Bar for Anchor Studs
Calibrated solid round bars with high tensile ductility, optimized for machining metric wedge anchor bolts and studs.
Explore Round Bar
Regulatory Compliance & European Directives
CE Certification Framework for Connectors & Expansion Bolts: The Engineering Paradigm
Under the European Construction Products Regulation (CPR 305/2011/EU), structural connectors, through-bolts, and expansion anchors must undergo exhaustive performance evaluations before receiving the CE mark. Mechanical anchors intended for load-bearing structural concrete are certified under European Assessment Documents (EAD 330232-00-0601), superseding legacy ETAG 001 guidelines. This rigorous assessment verifies characteristic resistance under tension, shear, combined stress states, and varying crack widths in concrete ranging from non-cracked (C20/25 to C50/60) to cracked conditions.
"In high-performance infrastructure, a fastener is never simply a piece of hardware; it is an engineered node transferring multidirectional dynamic loads between structural steel elements and base concrete."
For high-reliability procurement, tier-1 EPC contractors specifically mandate ETA Option 1 (European Technical Assessment) certification. This benchmark requires simulated crack-movement testing (opening and closing cracks up to 0.5 mm under continuous tension load) and cyclic seismic qualification classes C1 and C2 (EN 1992-4). Non-compliant commercial bolts experience premature slippage or catastrophic cone failure under low-frequency seismic resonance. At Tianjin Huizhong Xinyu (HZXY), our metallurgical integration ensures that cold-drawn carbon alloys and austenitic stainless steel grades (A2-70, A4-80) possess the precise elongation ratio (>12%) and microstructural ductility required to dissipate energy without brittle shearing.
1996
Established in Tianjin Hub
1,500+
Acres of Integrated Production Bases
10M+
Metric Tons Annual Mill Capacity
50+
Global Export Sovereign Markets
Strategic Sourcing Intelligence
Global Enterprise Sourcing Trends: Fasteners, Connectors & Structural Anchors
Procurement directors and chief structural engineers in civil infrastructure, offshore wind, and industrial modular plants are reshaping global fastener sourcing matrices around four critical pillars.
Full Traceability & EN 10204 3.1 Verification
Global mega-projects no longer accept generic commercial fasteners without full heat-lot provenance. Tier-1 buyers demand validated chemical spectroscopy, Charpy V-notch impact ratings at -20°C or -40°C, and calibrated tensile proof load records.
- Heat-number physical stamping on bolt heads
- Digitally archived raw coil mill certificates
- Batch-wise eddy-current crack detection
Corrosion Resilience & Modern Coatings
With massive growth in coastal civil engineering and offshore energy platforms, electroplated zinc is rapidly being phased out in favor of advanced metallurgical surface protections exceeding 1,500 hours of neutral salt spray (ASTM B117).
- Non-electrolytic Zinc Flake (Geomet / Dacromet)
- Zero hydrogen embrittlement risk for Grade 8.8+
- Hot-Dip Galvanizing with 45µm–85µm zinc thickness
Seismic C1 & C2 Qualification Mandatory
Seismic zoning updates under Eurocode EN 1992-4 require post-installed anchor bolts in structural steel connections to resist seismic cyclic loading. Structural engineers prioritize wedge expansion bolts certified for variable crack widths.
- Seismic C1 for non-structural safety elements
- Seismic C2 for primary structural steel anchoring
- Expanded expansion sleeve contact geometries
Industrial Ecosystem Mastery
China Industry 4.0: Supply Chain Resilience from Daqiuzhuang to Global Ports
How concentrated vertical integration across metallurgical smelting, multi-stage cold forming, in-house galvanizing, and automated automated optical inspection (AOI) establishes definitive supply continuity.
Raw Material Precision
Positioned directly inside Tianjin Daqiuzhuang and Tangshan steel clusters, HZXY selects ultra-pure steel billets (low P and S content) for drawing wire rods (SAE1008, SAE1018, Q235B, Q355B) eliminating internal inclusion flaws during high-speed cold heading.
Multi-Stage Cold Forming
Automated 5-station and 6-station high-speed progressive cold-forming machinery stamps expansion bolt mandrels, collars, and threads with exact pitch tolerances (6g/6H) at speeds exceeding 180 parts per minute with zero micro-fractures.
Automated Heat Treatment
Continuous mesh-belt atmosphere-controlled quenching and tempering furnaces ensure uniform core hardness without surface decarburization. Bolt grades (4.8, 5.8, 6.8, 8.8, 10.9) match exact European strength specifications.
Full Consolidation Freight
By producing section steel, rebar, steel pipe, plates, anchor bolts, and valves within the same supply perimeter, overseas buyers combine complex bills of materials into single container shipments via Tianjin Port, saving up to 28% in logistics overhead.
Engineering Equivalency & Specifications
International Structural Anchor & Fastener Equivalence Matrix
Comprehensive standard cross-reference facilitating international tenders requiring ASTM (North American), EN/DIN (European), ISO (Global), and GB (Chinese) compliance.
| Fastener Category | European (EN / DIN) | International (ISO) | American (ASTM / ANSI) | China (GB/T) | Tensile Strength (MPa) | Standard Surface Finish |
|---|---|---|---|---|---|---|
| Wedge Anchor (Through Bolt) | ETA EAD 330232 / DIN 125 | ISO 898-1 (Grade 8.8) | ASTM A510 / A108 (Grade B7) | GB/T 22795 | 800 – 1000 MPa | Zinc Flake / HDG / Zinc Plated |
| Heavy Duty Sleeve Anchor | DIN 7991 / EN ISO 10642 | ISO 898-1 Class 8.8/10.9 | ASTM F1554 (Gr. 36/55) | GB/T 5782 | 640 – 1040 MPa | Yellow Passivated / HDG |
| Drop-in Internal Thread Anchor | DIN 7952 / ETA Option 7 | ISO 3506-1 (A2/A4) | ASTM A307 Grade A | GB/T 13806.2 | 400 – 600 MPa | Blue-White Zinc Chromate |
| Structural Shear Connector Stud | EN ISO 13918 (Type SD) | ISO 13918 Type SD1 | AWS D1.1 / ASTM A108 | GB/T 10433 | ≥ 485 MPa (Yield ≥ 345) | Copper Washed / Natural |
| Chemical Capsule Anchor Stud | EN 1992-4 (TR 029) | ISO 898-1 Grade 5.8 / A4-70 | ASTM F593 / ASTM A193 B7 | GB 50367 Annex F | 500 – 800 MPa | Hot-Dip Galvanized / 316 SS |
| Chemical Epoxy Adhesive Injection | EAD 330499-00-0601 | ISO 22477-4 Bond Class | ICC-ES AC308 / ASTM C881 | GB 50728 Class A | Bond Stress > 18 MPa | Two-Component Cartridge |
Deployed Engineering Reality
Localized Engineering Application Scenarios & Proven Landmarks
From Olympic stadiums to deep-water sea crossings, HZXY heavy structural materials, anchor bolts, and connectors transfer critical foundation loads across world-class infrastructure.
National Stadium (Bird's Nest) Space Frames
High-tensile shear connectors and precision welded structural sections engineered for Beijing's signature 42,000-ton long-span curved lattice steel structure.
Beijing Daxing International Airport
Seismic-qualified baseplate connectors, heavy foundation anchor sleeves, and industrial valves securing the world's largest single-building terminal.
Jiaozhou Bay Marine Cross-Sea Viaduct
Heavy-duty hot-dip galvanized and marine-coated expansion hardware delivering durable cathodic protection against aggressive saline mist environments.
National Aquatics Center (Water Cube)
High-precision node connectors and multi-directional structural tie rods sustaining the complex ETFE bubble façade subframe under wind shear.
Heavy Modular Industrial Frameworks
Through-bolt anchor matrices and anchor plates supporting dynamic vibratory loads for heavy stamping presses, overhead crane rails, and gantry towers.
Municipal Pipeline & Seismic MEP Bracing
Drop-in anchor assemblies, slotted unistrut channels, and fluid valve controls resisting cyclic seismic shock waves in high-rise MEP distribution risers.
End-to-End Processing
Integrated Value-Add Processing: Ready-To-Install Fastener Systems
Material shipped ready for installation. Custom machining, drilling, bending, galvanizing, and kitting eliminate costly site labor and container dead space.
Cold Header & Thread Rolling
Continuous automated thread rolling prior to or following heat treatment maintains unbroken steel grain lines along thread crests and roots, providing superior cyclic fatigue limits compared to machined threads.
Thermal & Electro Galvanizing Lines
In-house computerized hot-dip galvanizing kettles operating at 450°C and automated zinc plating baths guarantee tight coating thickness control (from 5µm architectural bright to 85µm civil heavy HDG).
Laboratory Destructive Testing
Every shipment lot is tested on 1000kN universal hydraulic tensile test benches, calibrated torque wrenches, Rockwell/Vickers hardness machines, and metallurgical microscopes before releasing 3.1 certificates.
Engineering Due Diligence
CE Certification, Fastener Selection & Procurement FAQ
Authoritative technical answers to common queries submitted by global procurement teams, consulting engineers, and EPC contractors.
Q: What is the fundamental difference between ETA Option 1 and ETA Option 7 for Expansion Bolts?
ETA Option 1 assesses mechanical anchors in both cracked and non-cracked concrete under tension and shear stresses, including continuous crack width cycling up to 0.5mm. ETA Option 7 evaluates anchors strictly in uncracked concrete. Structural steel connections subjected to live, wind, or seismic loads require ETA Option 1 compliance to avoid catastrophic concrete breakout failures.
Q: How do you prevent hydrogen embrittlement in High-Tensile (Grade 8.8, 10.9) Expansion Bolts?
Electroplated fasteners with hardness exceeding 320 HV are vulnerable to atomic hydrogen absorption during acid pickling and electro-galvanizing. At HZXY, high-tensile bolts are mechanically de-scaled via shot-blasting or immediately baked at 200°C–220°C for 4 to 8 hours within 4 hours of plating. Alternatively, non-electrolytic zinc flake coatings (Geomet/Dacromet) are applied, totally eliminating chemical hydrogen exposure.
Q: How does anchor bolt embedment depth (h_ef) correlate with concrete cone failure?
According to EN 1992-4 and ACI 318 Concrete Capacity Design (CCD) methodology, the characteristic tensile resistance of a concrete cone is proportional to the effective embedment depth raised to the power of 1.5 (h_ef^1.5). Shallow anchor placement risks brittle substrate breakout before the steel bolt reaches its yield limit. We provide validated engineering calculation software tables ensuring structural equilibrium.
Q: Can expansion bolts and shear connectors be combined with structural steel profiles in one container?
Yes. As an integrated steel manufacturer operating across Daqiuzhuang and Tangshan bases with over 10 million tons of capacity, HZXY allows buyers to consolidate H-beams, hollow sections, rebar, anchor bolts, brackets, and PVC pipework into single shipments from Tianjin Port, drastically optimizing container cube space and consolidating customs documentation under a single master bill of lading.
Q: What documentation accompanies every export shipment of CE Certified fasteners?
Shipments leave our loading docks accompanied by complete EN 10204 3.1 Mill Test Certificates indicating cast heat number, exact chemical composition (C, Si, Mn, P, S, Cr, Ni, Mo), yield and tensile test curves, elongation percentages, torque-tension curves, surface finish thickness records, and Declaration of Performance (DoP) documents referencing the applicable European Assessment Document.
Q: Which anchor type is recommended for dynamic vibratory machinery versus static curtain wall brackets?
For dynamic vibratory machinery (compressors, gantry tracks), through-bolts with wedge expansion clips can loosen over time; heavy-duty undercut mechanical anchors or ETA-certified pure epoxy injection anchors with threaded rods are recommended. For static facade curtain-wall brackets, high-grade hot-dip galvanized or A4-70 stainless wedge anchors provide the ideal balance of installation speed and long-term shear load resistance.
Complete Project Bill of Materials
Integrated Steel, Piping & Fastening Portfolio: Year-Round Stock
Consolidate your heavy industrial bill of materials with certified Chinese production capacity. Explore additional core product lines available for rapid port loading.
Roofing & Cladding
PPGI Double Coated Prepainted Steel Coil
RAL custom color coatings engineered for self-tapping fastener installation in industrial corrugated roofing envelopes.
Explore PPGI Coil
Hot Dipped
DX51D–DX54D Galvanized Steel Coils
High-ductility deep-drawing zinc-coated coils formulated for progressive stamping of unistrut brackets and anchor sleeves.
Explore Galvanized Coil
Fastener Rod
SAE1080 / Q235 Hot Rolled Fastener Wire Rod
Calibrated steel wire coil stock engineered for high-speed cold heading of bolts, anchor pins, and concrete tie nails.
Explore Wire Rod
Drawn Wire
SAE1006 / SAE1008 Cold Drawn Low-Carbon Wire
Bright cold drawn wire with tight diameter precision tailored for nail manufacturing, threaded studs, and light anchors.
Explore Cold Drawn Wire
Structural Solid
Black Solid Structural Flat Bar 3–60mm
High-strength carbon flat steel ready for custom laser cutting, hole punching, and welding into heavy equipment baseplates.
Explore Black Flat Bar
Protective Pipe
Anti-Corrosion Coated Industrial Steel Pipe
Epoxy and 3PE-lined heavy industrial tubulars for utility networks, marine pilings, and high-pressure fluid lines.
Explore Coated Pipe
Fluid Controls
Pressure-Resistant Gate, Ball & Butterfly Valves
Heavy cast iron and forged steel pipeline valves matched to European and ANSI flanged connections in industrial MEP networks.
Explore Valves Line
Hardware
Custom-Fabricated Construction Fasteners
Stamped anchor plates, slotted channel connectors, embedment brackets, and customized engineering hardware produced to client blueprints.
Explore AccessoriesPartner with an Accountable Manufacturer for Your Next Anchor Tender
Gain direct factory access to 10M+ tons of annual metallurgical steel capacity, automated cold-forming precision, and complete CE/ETA compliance documentation. Our senior engineering trade specialists reply in fluent English within 12 hours.