OEM Cold Drawn Wire Factory & Quotes

Depending on customer drawing specifications and final wire diameter (ranging from 0.8 mm up to 14.0 mm), our precision tungsten carbide and polycrystalline diamond (PCD) dies maintain diameter tolerances within ±0.01 mm to ±0.03 mm (conforming to h9, h10, or h11 international tolerance standards). Ovality is held strictly within 50% of the total diameter tolerance band.

Yes. One of HZXY’s major advantages is full material consolidation. We can pack heavy cold-drawn wire coils in the bottom of a container alongside cut-to-length structural H-beams, steel pipes, PVC drainage materials, and industrial valves, allowing you to maximize container tonnage and reduce sea freight handling overhead.

We provide clean bright drawn (dry drawn with sodium/calcium soap), bright wet drawn (mirror-like surface for high-end plating or displays), phosphated (for enhanced die-lubrication in cold forging), and hot-dip or electro-galvanized coatings with zinc weights customizable from 40 g/m² to over 300 g/m².

HZXY’s primary production hub is situated in Daqiuzhuang Industrial Zone, Jinghai District, Tianjin, China, with an integrated secondary manufacturing site in Tangshan. Most export orders are loaded through Tianjin Port (Xingang), with secondary routing through Qingdao or Shanghai available upon request.

For standard grades like SAE 1006 / SAE 1008 in common wire gauges, our stock MOQ is 1 metric ton. For custom OEM draws, specialized tensile annealing, or non-standard alloys, the standard batch threshold is 10 to 25 metric tons (one 20ft container). Dispatches from current stock take 3 to 7 days; customized drafting runs average 15 to 25 days.

We fully support pre-shipment inspections by accredited third-party international agencies including SGS, Bureau Veritas (BV), Intertek, or Cotecna. Furthermore, our in-house lab provides pre-shipment photographic/video documentation of tensile testing, elongation analysis, wrap testing, and gauge micrometer checks.