Pre-qualified European standard CE-marked profiles rolled to EN 10025-2, PNS 49, and ASTM A36 specifications, fully certified for DPWH and private sector EPC requirements in the National Capital Region (NCR).
Hot-rolled universal universal beams and columns optimized for earthquake resistance in Metro Manila seismic zone 4. Custom drilling, cutting, and galvanizing ready.
High-yield equal and unequal angle bars engineered for coastal substations, transmission towers, and high-wind bracing across Bulacan and Cavite industrial corridors.
C-Channel and UPN profiles manufactured with tight web-to-flange tolerances, providing structural purlin integrity for Manila warehousing and logistics terminals.
Solid structural carbon flat sections for gusset plates, seismic dampers, earthing connections, and architectural baseplates in high-humidity tropical soil conditions.
Analysis of the Philippines' National Infrastructure Programs, Seismic Performance Mandates, and Port Logistics Dynamics.
Under the ongoing "Build Better More" (BBM) infrastructure framework, the demand for hot-rolled structural shapes—specifically standard I-beams (IPE, IPN) and universal beams—in Metro Manila, Cavite, Laguna, Batangas, Rizal, and Quezon (CALABARZON) has reached an unprecedented peak. Major megaprojects including the Metro Manila Subway Project (MMSP), the North-South Commuter Railway (NSCR), and port modernizations along Manila North Harbor and Batangas International Port demand certified, traceable structural steel with rigorous elongation and impact properties.
Operating within the Pacific Ring of Fire, structures in Metro Manila must strictly comply with the National Structural Code of the Philippines (NSCP 2015, Volume I - Buildings, Towers, and Other Vertical Structures), designated under Seismic Zone 4. Traditional low-ductility re-rolled profiles fail to meet the inelastic rotational capacity required for moment frames. Engineers and international EPCs frequently mandate CE-certified EN 10025-2 S355JR/J0 or dual-certified ASTM A572 Grade 50 hot-rolled I-beams that demonstrate verified Charpy V-notch (CVN) impact toughness of ≥ 27 Joules at 0°C or 20°C.
Philippine DPWH & PEZA Compliance Notice: Section 208 of the NSCP requires all structural sections deployed in primary lateral-force-resisting systems to carry authentic Mill Test Certificates (MTC Type 3.1 according to EN 10204) with clear batch heat traceability and factory testing for carbon equivalent value (CEV ≤ 0.45).
Furthermore, the maritime-tropical environment of Manila Bay induces aggressive atmospheric corrosion categorized under ISO 12944 Corrosivity Categories C4 (Industrial/Marine) to C5 (High Coastal Salinity). Bulk buyers constructing dry cargo warehouses, logistics hubs, and offshore container yards must procure I-beams rolled from chemically uniform molten steel with controlled silicon content (Sandein range control: 0.14% < Si < 0.25% or Si ≤ 0.03%) to ensure defect-free, ultra-thick Hot-Dip Galvanizing (HDG) coating adherence exceeding 85 to 100 microns (≥ 610 g/m²).
HZXY integrates direct ocean routing from Tianjin Xingang Port directly to Manila International Container Port (MICP) and Manila South Harbor (MIRS). This direct liner connection guarantees a fast transit time of 7 to 10 days, mitigating supply chain vulnerabilities caused by domestic rolling mill downtime and transshipment bottlenecks in regional Southeast Asian feeder ports.
Indicative volume pricing for project planning, derived from Tianjin-Tangshan rolling hubs, verified under EN 10025-2, ASTM A36, and JIS G3101 standards. Pricing reflects break-bulk and 40ft HQ containerized shipments to Manila Ports.
| Profile Designation | Dimensions (H × B × t1 × t2 mm) | Weight (kg/m) | Certified Steel Grade | FOB Tianjin Port (USD/MT) | CIF Manila Port (USD/MT) | Lead Time & Availability |
|---|---|---|---|---|---|---|
| IPE 100 | 100 × 55 × 4.1 × 5.7 | 8.1 | EN 10025-2 S275JR / Q235B | $580 - $610 | $625 - $655 | Immediate Mill Stock (3,000 MT) |
| IPE 160 | 160 × 82 × 5.0 × 7.4 | 15.8 | EN 10025-2 S355JR / Q355B | $595 - $625 | $640 - $670 | Ready for Dispatch (7 Days) |
| IPE 200 | 200 × 100 × 5.6 × 8.5 | 22.4 | EN 10025-2 S355JR / A572 Gr.50 | $600 - $630 | $645 - $675 | Continuous Production Line |
| IPE 240 | 240 × 120 × 6.2 × 9.8 | 30.7 | EN 10025-2 S355J0 / SM490A | $605 - $635 | $650 - $680 | Immediate Export Loading |
| IPE 300 | 300 × 150 × 7.1 × 10.7 | 42.2 | EN 10025-2 S355JR / Q355B | $615 - $645 | $660 - $690 | Break-Bulk Scheduled Monthly |
| IPN 200 (Standard) | 200 × 90 × 7.5 × 11.3 | 26.2 | DIN 1025-1 / S275JR | $590 - $620 | $635 - $665 | Factory Yard Stock |
| HEA / HEB 160 | 152 × 160 × 6.0 × 9.0 | 30.4 | EN 10025-2 S355JR / CE 0035 | $610 - $640 | $655 - $685 | Custom Lengths 6m - 12m |
| HEB 240 | 240 × 240 × 10.0 × 17.0 | 83.2 | EN 10025-2 S355K2 / Heavy Frame | $630 - $660 | $675 - $705 | Rolling Cycle Every 15 Days |
*CIF prices quoted are calculated with base ocean freight to Manila North/South Harbor and are subject to weekly bunker surcharges and raw steel scrap indexes. Custom lengths (5.8m for 20GP, 11.8m for 40HQ, 12m for Break-Bulk) and pre-punching drilling configurations available on demand.
Operating from China's primary structural steel core in Tianjin and Tangshan, HZXY delivers unmatched cost-efficiency, rolling precision, and production velocity to Philippine contractors.
Our Tangshan rolling mills feature closed-loop optical cross-section pyrometers and hydraulic automatic gauge control (HAGC). This ensures web-to-flange perpendicularity within ±0.5 mm tolerances, completely eliminating site fit-up delays during Manila high-rise erection.
Located just 60 km from Tianjin Xingang Port, our 1,500-acre industrial staging facility allows immediate consolidation of I-beams with hollow structural sections (HSS), rebar, and pipeline packages, cutting port drayage costs and avoiding demurrage fees.
Every batch undergoes atomic emission spectrometry to monitor Carbon (C), Silicon (Si), Manganese (Mn), Phosphorus (P), and Sulfur (S). Full batch heat numbers are deep-stamped into beam webs, accompanied by authentic EN 10204 3.1 certification.
Cross-standard harmonization matching European EN, Japanese JIS, and American ASTM engineering mandates for joint-venture infrastructure execution.
Rapid roof trusses and mezzanine flooring I-beams engineered for automated sorting centers in Clark Freeport Zone and Laguna Technopark. Cut-to-length 11.8m spans facilitate rapid bolt-assembly, reducing on-site welding costs by up to 35%.
Heavy-flange I-beam diaphragms and falsework shoring systems engineered to endure cyclic dynamic loads for elevated viaduct sections. Fully verified under ISO 148-1 impact protocols to eliminate brittle fracture risks.
Subsea and coastal splash-zone certified beams with heavy hot-dip zinc coatings (≥ 610g/m²) and factory-applied epoxy shop primers. Formulated specifically to endure high-salinity seawater exposure across Subic and Batangas Bay.
International projects in Metro Manila led by Japanese (JICA), Korean (KOICA), or Western multilateral development banks demand precise material grade interchangeability. HZXY provides direct cross-certification: China GB/T 1591 Q355B is delivered fully equivalent to European EN 10025-2 S355JR, American ASTM A572 Grade 50, and Japanese JIS G3106 SM490A. All equivalent certificates are endorsed by ISO/IEC 17025 accredited laboratory testing.
Overcoming clearance hurdles at the Bureau of Customs (BOC), Department of Trade and Industry (DTI), and Bureau of Philippine Standards (BPS).
Importing structural shapes into Manila requires navigating strict Philippine Technical Regulations (DAO 02:2007 and DAO 18-03). HZXY equips all shipments with complete manufacturer mill profiles, factory ISO 9001/14001 audits, and pre-loading inspection certificates from SGS, Bureau Veritas, or TÜV. This minimizes customs inspection hold-ups at the Manila International Container Terminal (MICT).
Every single bill of lading is supported by an airtight quality documentation dossier formatted specifically for direct presentation to lead structural engineering consultants (e.g., DCCD, TCGI, Arup Philippines):
Pioneering sustainable steelmaking and Building Information Modeling (BIM) readiness for next-generation green-rated developments in the Philippines (BERDE & LEED Certified).
HZXY is expanding its low-carbon product line leveraging scrap-based EAF metallurgy, delivering up to 60% lower embedded carbon footprints (tCO²/t steel). This supports carbon compliance for landmark Manila commercial developments pursuing LEED Platinum and BERDE certifications.
Every I-beam dimension is supported by pre-configured Revit and Tekla parametric library files. Structural engineers and detailers can import exact web profiles, bolt patterns, and corner radii into their building models, speeding up shop drawing approvals by weeks.
Investment in multi-axis CNC drilling and automated plasma coping systems allows I-beams to be pre-notched, mitered, and slotted directly at our factory before shipping to Manila, dramatically cutting on-site installation labor requirements.
Detailed clarity on certifications, shipping logistics, payment terms, and technical grade matching.
Consolidate section steel, industrial piping, reinforcement bar, and wire rod into a unified export container shipment directly from Tianjin to Manila, drastically reducing logistics administration.
High-grade hot-rolled and cold-rolled carbon steel coils engineered for roll-forming decking sheets, purlins, and pre-engineered building wall profiles.
Hot-dip galvanized structural round pipes engineered for high-load falsework, scaffolding, shoring towers, and modular greenhouse framing in humid climates.
High-tensile deformed reinforcing bars engineered for foundation piles, deep pile caps, and seismic diaphragms compliant with NSCP 2015 high-ductility rules.
Precision hot-dip galvanized solid round steel bars for foundation tie-rods, lightning earthing grids, anchor bolts, and marine pontoon moorings.
Standard parallel and tapered flange I-beams suited for crane runway girders, industrial mezzanine systems, and high-load commercial spans across the Philippines.
Hot-rolled carbon square steel bars engineered for security fencing, heavy industrial grates, machine components, and structural reinforcing keys.
Heavy-duty, corrosion-proof drainage, stormwater, and power cable containment pipes engineered for Manila flood control and underground utility undergrounding.
Resilient gate, butterfly, globe, and check valves matched directly with our pipe series to ensure pressure compatibility across HVAC, fire protection, and gas lines.
Speak directly with our English-fluent engineering sales team. Submit your project bill of materials (BOM), target port destination (Manila North / South), and required delivery schedule for a binding CIF quotation within 24 business hours.
